Bulk Materials

Pea Gravel Calculator

Calculate the tons of pea gravel needed for paths, patios and play areas.

ft
ft
in
Walkways and patios need 2–3 in. Playground surfacing needs 9–12 in.
Pea gravel needed tons
Volume cu yd
50 lb bags (if buying bagged) bags

What you'll need to order

Prices vary by region and haul distance. Get quotes from at least two local suppliers.

How this calculator works

tons = length × width × (depth ÷ 12) × 96 ÷ 2000

Pea gravel weighs about 96 lb per cubic foot — lighter than angular crushed stone because the rounded stones pack loosely. A cubic yard runs roughly 2,600 lb.

Worked example

With length 10 ft, width 10 ft, depth 3 in, this calculator returns 1.2 tons.

Pea gravel coverage by depth

Figures below assume length 10 ft × width 10 ft. Change any measurement in the calculator to get your own numbers.

DepthPea gravel needed (tons)Volume (cu yd)50 lb bags (if buying bagged) (bags)
1 in0.400.3116.00
2 in0.800.6232.00
3 in1.200.9348.00
4 in1.601.2364.00
6 in2.401.8596.00

Per 100 square feet at 96 lb per cubic foot. Rounded stone stays loose — it never compacts the way angular gravel does.

How much pea gravel for a path, patio or playground?

JobSizePea gravel neededMaterial cost
Garden path 40 ft × 3 ft × 2 in 0.96 tons$34 – $77
Fire pit surround 12 ft × 12 ft × 3 in 1.73 tons$60 – $138
Dog run 20 ft × 10 ft × 3 in 2.40 tons$84 – $192
Playground surfacing
depth set by fall height
20 ft × 20 ft × 9 in 14.40 tons$504 – $1,152
Drainage around a foundation 60 ft × 2 ft × 6 in 2.88 tons$101 – $230

Pea gravel migrates without a hard edge. Steel, stone or timber edging is not optional on anything bordering a lawn or path.

Cost range uses $35–$80 per ton for material only.

What does pea gravel cost?

Material typically runs $35 to $80 per ton. Bulk, delivered. Bagged pea gravel from a garden centre works out around three times the bulk price.

What moves the price:

Prices are US averages and move with fuel, season and haul distance. Always get two local quotes before budgeting.

Depth by use

TypeDepth (in)Notes
Decorative bed topping2.00 Enough to hide fabric and suppress weeds
Garden path2.50 Deeper feels unstable underfoot
Patio or seating area3.00 Over a compacted base, not bare soil
Drainage trench6.00 Around perforated pipe
Playground under 5 ft fall9.00 Check your local safety standard

Beyond about 3 inches pea gravel feels like walking on sand. For paths people use daily, angular crushed stone holds far better underfoot.

Frequently asked questions

How many tons of pea gravel do I need?

Multiply area in square feet by depth in feet, then by 96, then divide by 2,000. A 20 by 4 ft path at 3 inches deep needs about 0.96 tons.

Is pea gravel cheaper than concrete?

Far cheaper upfront — roughly a fifth the installed cost of a concrete patio. It also needs topping up every few years and cannot take furniture legs or wheeled loads well.

What goes under pea gravel?

Geotextile fabric over a compacted base of crushed stone for anything bearing weight. Laid straight on soil, pea gravel sinks in within two seasons.

How deep should pea gravel be?

Two to three inches for walkways and patios over a compacted base. Driveways need 4 inches or more, and playground fall zones require 9 to 12 inches to meet impact-attenuation guidance.

How much does a yard of pea gravel weigh?

About 2,600 lb, or 1.3 tons. Rounded pea gravel packs looser than angular crushed stone, so it weighs slightly less per cubic yard than a comparable volume of #57 stone.

How much area does a ton of pea gravel cover?

At 2 inches deep, one ton covers about 125 square feet. At 3 inches, roughly 83 square feet. At 4 inches, around 62 square feet.

Does pea gravel need a base underneath?

For walkways over stable soil, landscape fabric alone is usually enough. For patios and anywhere vehicles go, put down 3 to 4 inches of compacted crushed stone first — pea gravel is rounded and will not compact on its own.

Is pea gravel good for a driveway?

It is a poor first choice. The rounded stones shift under tyres, migrate to the edges and rut. Angular crushed stone locks together and holds up far better. If you want the pea gravel look, use it as a thin top layer over a compacted crushed base.